Browse all practice questions for the NCEES PS Practice Exam. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

NCEES PS Practice Exam course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • Which statement about personal property is correct?
  • How many sections are contained in a PLSS township?
  • Prescriptive easements require which of the following as elements?
  • In steel connections, what is the difference between a moment connection and a simple shear connection?
  • The Torrens title system is used in which areas?
  • A tract divided into two or more parcels is known as what?
  • Which doctrine states that the public has rights in the beds of navigable waters below the high water mark, with states empowered to exercise these rights on the public's behalf?
  • Which term describes land on large bodies of water such as an ocean or large lake?
  • Lands that are covered and uncovered by the ebb and flow of the tide are known as which term?
  • The difference between dead load and live load is:
  • Takeoff data in cost planning is primarily used to prepare which document?
  • Which term means there are no limitations on time, and the estate can continue forever?
  • The purpose of a load path in structural analysis is to ensure loads travel:
  • Easements in gross are best described as:
  • What is the primary function of shear reinforcement in reinforced concrete beams?
  • Which statement about schedule impact is true regarding the critical path?
  • Which statement best describes the meaning of NPV in capital budgeting?
  • Bolt edge distances and spacing influence which aspect of connections?
  • The general presumption about rights acquired in an estate extends from the center of the earth to the heavens above. What term describes these rights?
  • Which three features must be present for a monument to be considered controlling?
  • In a statically determinate truss, how is a member force typically determined?
  • Which statement best characterizes wind loading versus gravity loading?
  • What is the primary purpose of a foundation in a structure?
  • What is the role of a structural engineer in project documentation?
  • In the phrase 'to Jones for the life of Brown and then to Smith in fee simple', which estate is created for Jones?
  • In land subdivision, a parent Tract is divided into how many parcels?
  • Federal Statutes specify that boundary lines shall be established as what?
  • Livery Seisin involves delivering in front of a witness what?
  • Which process involves a sudden addition to land by water, altering shorelines?
  • Which statement best defines a condominium?
  • In finite element method, what is used to represent the field within each element?
  • Which of the following describes an appurtenant easement?
  • Which term is best defined by lines of equal magnetic declination?
  • In structural design, which statement best describes the deflection criterion?
  • What are Standard Parallels in the US Survey?
  • Which of the following is an example of corporeal property?
  • Which term describes the broadest form of ownership in land, limited only by government powers?
  • Which statement about the critical path is accurate?
  • What describes the Principal Meridian?
  • What is the primary purpose of redundancy in structural systems?
  • For a monument to be considered controlling, which of the following is NOT a requirement?
  • Which concept requires delivery of possession to transfer real property?
  • Which example illustrates a bounds description of a parcel?
  • What is a latent ambiguity?
  • An easement must have two tenements: The Dominant (to which the right attaches) and the Servient (upon which the burden attaches).
  • In timber design, what is a common consideration for fasteners?
  • What is the allowable accuracy for an ALTA/NSPS Survey?
  • Which code would you consult for wood design?
  • A typical objective of performance-based design is to meet specific performance objectives under various hazards.
  • Which document conveys a right for a specific use of land without conveying ownership?
  • A Lien is best described as:
  • Which statement about real property is correct?
  • Which term describes land on rivers, streams and small lakes?
  • In the example 'to Jones for the life of Brown and then to Smith in fee simple', who ultimately receives the fee simple interest?
  • Standard Parallels are monumented at what interval?
  • Meander lines are used for which purpose?
  • In structural detailing, why are edge distances and spacing important for bolts?
  • What is the main purpose of a life-safety analysis?
  • Re-Surveys are surveys conducted by which agency that reconstruct land boundaries by re-running and re-marking lines from field note records or the plat of a previous official survey?
  • Why is quality control important in construction?
  • Created boundaries are defined by which survey concept?
  • Which type of easement is created by a written instrument?
  • What describes the Base Line?
  • Which document is used to transfer title to real property from one party to another?
  • Dedication is the setting aside of private property for public use.
  • For a cantilever beam with uniform load w, what is the maximum moment expression?
  • Which element of adverse rights refers to possession that is hostile to the true owner's rights?
  • Minor Subdivision is permitted provided that it does not involve which of the following?
  • Which estate provides ownership, possession, and control for someone's lifetime?
  • Which tidal pattern has two successive high tides of different heights each day?
  • Which of the following is described as a non-possessory right that benefits one parcel of land and burdens another?
  • A diurnal tide is defined as?
  • A covenant is best described as:
  • Which term refers to the creation of dry land by the gradual withdrawal of water?
  • Color of Title refers to:
  • Which estate requires a future event to occur for the estate to continue, i.e., there are conditions on the estate?
  • When a design defect is discovered after drawing release, what is the engineer's ethical obligation?
  • In a water balance, storage represents which of the following?
  • Define ductility in materials.
  • Life estates and easements terminate upon death of the life estate holder.
  • Which statement best defines incorporeal property?
  • The term that indicates an estate is not a fee tail (a fee tail estate must be inherited by a specific person) is?
  • The Land Ordinance Act is associated with which milestone?
  • An Independent resurvey is characterized by which action?
  • What is the difference between LRFD and ASD in steel design?
  • In the rectangular government survey system, the Base Line runs in which direction relative to the Principal Meridian?
  • Which statement correctly contrasts easements in gross with appurtenant easements?
  • What term best describes land adjacent to a large body of water, such as an ocean or large lake?
  • An Informative Term in a deed is used to describe or clarify what?
  • How does live load influence serviceability?
  • Closing Corner concept is defined as what?
  • The first public land survey was conducted under the Land Ordinance Act in which year?
  • Which item is explicitly listed as disallowed in a minor subdivision?
  • What is a load factor in LRFD?
  • How does a pile foundation differ from a spread footing?
  • What is the purpose of reinforcement detailing in concrete beams?
  • Metes Descriptions describe property boundaries by:
  • The essential difference between serviceability and ultimate strength is:
  • Easements by estoppel occur when:
  • What is a load path in seismic design of frames?
  • A Retracement Survey is primarily used to determine what?
  • What is a likely consequence of inadequate shear reinforcement in a concrete beam?
  • What is the purpose of a construction contract in engineering projects?
  • A water balance accounts for inflows, outflows, and which additional term?
  • In geotechnical design, what is the significance of settlement limits?
  • The habendum clause begins with which phrase?
  • What is the relationship between capacity design and ductility?
  • Which statement about ductility is most accurate?
  • In steel connections, what does a simple shear connection primarily resist?
  • What is an easement?
  • A reversionary right is defined as a right that permits an adjacent landowner to gain or regain certain rights of land within a vacated easement.
  • Extrinsic evidence can be used to clarify which type of ambiguities in contracts?
  • In priority of calls, which type of call controls if there is a conflict: course or distance.
  • Estate per Autrie Vie is measured by the life of someone other than the holder. Which term matches this description?
  • Which process is defined as the washing up of sand, gravel, and soil to form firm land due to current and waves?
  • The specification 0.07 ft (or 20 mm) + 50 ppm is part of which standard?
  • Natural Monuments are generally considered superior to artificial because of certainty of location.
  • What is a negative easement?
  • Which concept describes an estate measured by the life of a person other than the holder?
  • Which word is typically used as an informative term to a monument call?
  • For tacking to satisfy the statutory period in adverse possession, possession must be what?
  • Which description best fits a latent ambiguity, as opposed to a patent ambiguity?
  • An estate that provides the owner with a complete set of legal rights, limited only by government powers is called?
  • What is the standard size of a PLSS township?
  • Acquiescence in land surveying refers to what?
  • Which concept involves delivering a symbolic item of land in the presence of a witness?
  • Which codes provide standardized design rules for concrete, steel, and wood respectively?
  • Which statement best describes static loads?
  • Which term describes the gradual withdrawal of water that exposes dry land?
  • In hypothesis testing, what does a Type I error represent?
  • In the finite element method, the field inside an element is approximated using which type of functions?
  • Easement Deed conveys which of the following?
  • Which of the following is considered incorporeal property?
  • A Retracement Survey is defined as which of the following?
  • A Bargain and Sale Deed with Covenants is best described as:
  • A monument by common report is accepted under what condition?
  • Which factors influence soil bearing capacity?
  • What is a Deed?
  • In construction documents, which option describes the primary purpose of a specification?
  • In adverse rights, which element is not typically listed among the standard elements?
  • In professional practice, what is a conflict of interest?
  • Takeoff in construction estimating is defined as?
  • Which statement best captures the concept of capacity design in seismic resistance?
  • Which deed promises to defend the title against claims?
  • What does an isogonic map depict?
  • Which of the following is NOT a typical seismic retrofit measure to improve performance?
  • Which of the following is a primary mechanism by which seismic retrofit improves performance?
  • Under the Torrens Title System, ownership is evidenced by registration with which body?
  • For a cantilever beam with uniform load w, where is the maximum moment?
  • Which phenomenon is the sinking of land, often due to extraction activities?
  • A key objective in seismic design is to:
  • What are Guide Meridians?
  • How are the 36 sections of a township read in sequence?
  • Which scenario best illustrates a serviceability concern in a building element?
  • In steel member design, what does the slenderness ratio indicate?
  • In geotechnical engineering, bearing capacity describes:
  • Which statement is true about corporeal property?
  • An estate that can be inherited or divested by will or other document is called?
  • What term describes the gradual washing away of soil by current or waves?
  • Settlement limits in geotechnical design help ensure differential settlement does what?
  • Which tide pattern features two high tides and two low tides each day?
  • In project risk management, what is a risk register?
  • What defines a patent ambiguity?
  • Parole evidence (oral testimony) can be used for what purpose?
  • Which is a method for creating an easement by necessity?
  • Which survey type explicitly ignores the original survey and sets new monuments?
  • FEMA LOMR-F stands for what?
  • Under adverse possession, tacking allows an adverse possessor to?
  • For a simply supported beam with a center point load P, what is the maximum bending moment?
  • An easement burden attaches to which part of the property?
  • Which term defines the sudden and perceptible loss or addition to land by action of water?
  • What is the purpose of a code of ethics in engineering?
  • Which statement best describes extrinsic evidence?
  • If net present value is positive, what does this indicate?
  • Which description best defines a Dependent resurvey?
  • What is a Quadrangle Map?
  • What is the critical path in project scheduling?
  • A project costs 1,000,000 today, yields 150,000 per year for 8 years, discount rate 8%. What is the NPV?
  • Sequential Conveyances refers to deeds in which what rights exist between parcels?
  • Which term denotes an estate with no time limit that can continue forever?
  • When selecting construction materials, which is a primary consideration?
  • Under the US National Map Accuracy Standards for Elevation, what is required for field check elevations?
  • Which type of easement attaches to a person rather than to the land?
  • Quality control factors used to determine QC needs include which of the following?
  • For a simply supported beam with a center point load P, what is the maximum bending moment?
  • Warranty Deed includes which promises?
  • Historically, which deed conveyed a conveyance free of covenants but may now include covenants?
  • Which option is NOT a recognized code for structural material design?
  • Which statement best describes an affirmative easement?
  • In steel connection types, which statement best describes the difference between a moment connection and a simple shear connection?
  • In engineering economics, what does net present value (NPV) represent?
  • A section is nominally how many acres?
  • Littoral landownership concerns land adjacent to which type of water body?
  • What is the engineer's primary duty under professional ethics?
  • Which of the following is NOT listed as a quality of a good monument?
  • Quit Claim Deed is best described as:
  • Major Subdivision is defined as what?
  • The sinking of land, usually the result of natural resource extraction, is called what?
  • The phrase 'one-half the contour interval' appears in which standard?
  • The phrase 'to have and to hold' is part of which instrument?
  • Which statement best describes the serviceability focus in structural design?
  • In reinforced concrete design, what is the role of reinforcement in bending?
  • What is a Section?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy